Introduction to the characteristics of gas heat conduction oil furnace

　　The heat-conducting oil furnace market is ever-changing, and more and more new products are being developed. The environmental pollution and low efficiency of the traditional heat-conducting oil boilers have been highlighted, and they are gradually being eliminated by the market as the environmental protection is becoming more and more stringent today. As its upgraded product, a gas-fired thermal oil boiler, it meets the market demand at this stage. Gas-fired heat-conducting oil furnace technology is the performance and use. The equipment has low pressure (≤0.4MPa) and stable operation. It is automatically controlled by computer. The thermal efficiency can reach more than 90%. Vertical gas (oil) heat-conducting oil furnace is widely used in petrochemical and grease materials. , Building materials industry, textile printing and dyeing, food, plastics, rubber, pharmacy and other occupations, it is a new type of aspiration heating equipment. The following introduces its characteristics for you.

　　The heating surface of the boiler body of the gas heat conduction oil boiler has a compact structure. The heating surface is composed of inner and outer closely arranged discs. The inner coil is a radiant heating surface, and the outer surface of the outer coil and the inner coil constitute a convective heating surface. The boiler is composed of an upper body and a lower incinerator, which are combined on site. Incineration After being fully incinerated in the incinerator, the radiant heating surface absorbs most of the heat, and the high-temperature flue gas enters the convection heating surface for heat exchange. After exiting the boiler, the air required for boiler incineration is heated in the air preheater, and then passed through the dust collector. The flue gas is sent to the chimney by the induced draft fan to be discharged into the atmosphere.

　　1.Before using the gas heat conduction oil furnace, it is necessary to lay natural gas pipelines, and secondly, it has high requirements for the production environment

　　2. Easy to install and maintain.

　　3. Obtain low-pressure and high-temperature heat medium, easy to adjust, uniform heating, and can meet precise process temperature.

　　4. Liquid-phase circulation heating, no heat loss due to condensation, and high thermal efficiency of the heating system.

　　5. The roof of the gas-fired heat-conducting oil furnace adopts a top coil structure and high-aluminum refractory castables, which solves the defect of frequent collapse and damage of the original furnace roof.

　　Attention should be paid to the operation of gas heat conduction oil furnace!

　　(1) Check the pressure before running. If it is too large or too small, stop working. When the furnace is shut down, the circulation pump can be stopped only after the oil temperature drops to a certain temperature. In addition, when the boiler is at a high temperature, it is necessary to ensure that the heat transfer oil has a normal circulation.

　　(2) As for the oil output temperature of the gas-fired heat-conducting oil furnace, it is strictly forbidden to exceed the allowable working temperature of the heat-conducting oil. Different types of heat transfer oil cannot be mixed. In addition, the blower and induced draft fan in the boiler are the induced draft fan first and then the blower when starting, and the sequence is reversed when the boiler is shut down.