Coking Waste Heat Boiler

Coking Waste Heat Boiler

Coking Waste Heat Boiler

Much exhausted gas generated in coking plant, in order to recover the gas with teh temperature 550~900℃, Xinli Boiler has designed coking waste heat boilers based on the special characteristics of coking industry. This type of heat and smoke have the same characteristics as the flue gas carbon heat. Supplementary fired boiler with automatic oven gas burner for efficient combustion. Therefore, in addition to supplementary firing, all the waste heat boilers have the same or similar structure.

The new coking waste heat boiler, a highly efficient heat transfer, separation of functions furnace soot, and its new compact, low cost, small footprint and high efficiency, environmental protection, energy saving, the leading domestic level.

5~75t/h

Rated Evaporation Capacity

1.0~9.8Mpa

Working Pressure

185-540°C

Steam Temperature

Waste Heat Recovery

Application

Details Preservation

Coking Waste Heat Boiler

Performance Advantages

1. High efficient heat transfer

Heat transfer of exhaust gas and water/steam is proceed on surface, the outside of exhaust gas heat pipe is fin, so the heat transfer area increases, and the heat transfer coefficient increases.

2. Anti-ash-deposition, anti-ash-fouling, anti-corruption

The temperature of tube wall can be adjusted by adjust the ratio of hot and cold surface on heat pipe. Increases the temperature and let it higher than the dew point temperature or maximum corrosion area, which can prevent corrosion, extend the life of he

3. Avoid the leakage of water-steam system

During operation, due to a large amount of exhaust gas scour, it will not cause the air and water from the cold side to leak to the hot side, ensuring the safe operation of the system.

4. Small Resistance Loss, Suitable for Old Units

In general, when waste heat recovery equipment is added, the resistance of hot exhaust gas increases at about 1500Pa. The damage of one or more heat pipes does not affect the overall use of the equipment

Technical Parameters

 
Model Rated Evaporation Capacity (t/h) Rated Pressure (MPa) Steam Temperature (℃) Feed Water Temperature (℃)
Q45/850-15-2.45/400 15 2.45 400 104
QC170/650-35-3.82/450 35 3.82 450 104
Q90/950-35-3.82/450 35 3.82 450 105
BQ36/650-35-3.82/450 35 3.82 450 104
BQ60/800-35-3.82/450 35 3.82 450 150
Q158.7/700-35-3.82/450 35 3.82 450 104
Q130/850-45-3.82/450 45 3.82 450 142
Note: Xinli Boiler could customize design the waste heat recovery boiler based on the actual demand

Applicable Industries

Chemical Industry Boiler

Chemical Industry Boiler

Chemical Industry Boiler

Pharmaceuticals Industry

Pharmaceuticals Industry

Pharmaceuticals Industry

Sugar Industry Boiler

Sugar Industry Boiler

Sugar Industry Boiler

Brewery Industry Boiler

Brewery Industry Boiler

Brewery Industry Boiler

Related Products

Carbon Rotary kiln waste heat boiler

Carbon Rotary kiln waste heat boiler

Rated Evaporation Capacity

4 ~ 30 t/h

Mixed Chemical Waste Heat Recovery Boiler

Mixed Chemical Waste Heat Recovery Boiler

Rated Evaporation Capacity

10 ~ 80 t/h

CDQ Waste Heat Boiler

CDQ Waste Heat Boiler

Rated Evaporation Capacity

4~75t/h

Glass Furnace Flue Gas Waste Heat Boiler

Glass Furnace Flue Gas Waste Heat Boiler

Rated Evaporation Capacity

3~35t/h

Service Support

After-sales
service
Industry news
news
Boiler Model Selection
Boiler Model Selectio
Maintenance knowledge
common problem
Service appointment

Contact Us

Resolve Your Problems within One Minute

xinli whatsapp

WhatsApp:0086-13803825084

wechat

WeChat

xinli company address

Address:No.11 Minhe Road, Private Industrial Park, Development Zone, Kaifeng City

Inquiry

If you have any questions about our company and products, please contact us immediately. Any inquiries and Suggestions would be appreciated.
We will keep your information confidential.

Power or Capacity: